Instruction manual

2-7
2.3 Working Range
2.3.1 Tool Capacity
T-7M
If the O.D. tool shank is □25mm(1”)＊150mm(6”) long,
then the maximum turning diameter is∮285mm(11.22”). If
there is adjacent boring bar holder, then the maximum turning
diameter is∮136mm(5.35”); if the I.D. tool shank have
adjacent boring bar holder, then the maximum turning diameter
can achieve∮154(6.06”); if the boring bar tool shank have
adjacent boring bar holder, then the masimum turning diameter
can achieve∮176mm(6.93”).