User manual

17
First steps
Gigaset SL785 / USA en / A31008-M2009-R301-4-6019 / starting.fm / 14.02.2011
Version 4, 16.09.2005
Setting up area codes
Before you can return a call from the Calls list (¢ page 33), you must store the local
area code of the area in which your phone is being used. If your phone is in a mul-
tiple area code area, you must also store the extra codes for that area.
Local Area Code
v ¢
Ï
¢ Tele pho ny ¢ Local Area Code
~ Enter the local area code.
§Save§ Press the Display key.
a Press and hold (idle status).
Extra Codes
v ¢
Ï
¢ Tele pho ny ¢ Extra Codes
~ Enter the extra code.
§Save§ Press the Display key.
a Press and hold (idle status).
Repeat the above steps until all the extra codes have been entered for your area.
A maximum of five (5) extra codes can be stored.
Your phone is now ready for use!
Connecting the USB cable
You can connect a standard USB data cable with
a mini-B connector to the back of your handset
to connect the handset to a PC. To use this func-
tion, the Gigaset QuickSync software must be
installed (
¢ page 63).
¤ Remove the belt clip (if attached)
(
¢ page 12).
¤ Remove the battery cover (¢ page 12).
¤ Connect the USB cable to the USB socket 1.
1