User guide

Configuring the Wireless AP
Configuring VLAN Tags for Wireless APs
SCALANCE WLC711
3-50 C79000-G8976-C260-03, 07/2012, User Guide, V8.11
3. Do the following:
– To delete EAP-TLS credentials, click Delete EAP-TLS credentials.
– To delete PEAP credentials, click Delete PEAP credentials.
The credentials are deleted and the Wireless AP settings are updated.
Setting Up 802.1x Authentication for Wireless APs Using Multi-edit
In addition to configuring Wireless APs individually, you can also configure 802.1x authentication
for multiple Wireless APs simultaneously by using the AP 802.1x Multi-edit feature.
When you use the AP 802.1x Multi-edit feature, you can choose to:
• Assign EAP-TLS authentication based on generated certificates to multiple Wireless APs by
uploading a .pfx, .cer, or .zip file.
• Assign PEAP credentials to multiple Wireless APs based on a user name and password that
you define
To Configure 802.1x EAP-TLS Authentication in Proxy Mode Using Multi-edit:
1. From the top menu, click Wireless APs. The Wireless AP screen is displayed.
2. In the left pane, click AP 802.1x Multi-edit.
Note: If you attempt to delete the 802.1x credentials of a Wireless AP that currently does not have
an active session with the SCALANCE IWLAN Controller, the credentials are only deleted after the
Wireless AP connects with the SCALANCE IWLAN Controller.