User Manual

Edge App Manager User Guide
Creating Edge app
1
A6V12059211
9 | 18
– These volumes are created at the application level and mounted to a
service. If the same volume is enabled for multiple services within an app,
they all share the same volume. This was done by design, due to a working
assumption that developer would have control over all services being
included in an Edge app and that there would be no concern if services of
an app would share the same volume.
– On enabled volume, valid target MUST be provided.
7. Custom volumes for services:
– A developer can choose to define custom volume for a service, whereby
the name of the volume, its target mount path has to be specified.
– Developer can define multiple such custom volumes for a service, each of
which would be identified by the name given to them.
– If multiple services have a custom volume with the same name, then the
custom volume is shared across the said services.
– To conform to the original concept, the actual volume on the Edge device is
created with the name of the app prefixed to it.
– The original Settings & Data volumes are still available for the services
along with any custom volumes that may have been defined.
8. Go to Open Source software license and fill in the according field.
9. Go to Release notes and fill in the according fields.
Release notes and Open Source software license mandatory for release.
Uploading OSS license files [➙ 10]
10. Confirm with Update.
 The app is configured.