Installation Guide

19
Load Center Selection & Application Guide |
Murray Load Centers
Features
A rigid, strudy
base pan with
metal hook
rails provides
the most
rugged breaker
connection in
the industry.
With the use of
the included
bonding strap,
ground bars
and neutral
bars can be
bonded for
service entrace
applications.
All devices are convertible from
main lug to main breaker or vice
versa with the addition of main
breaker or main lug kits.
All main breakers
are straight in wired-
no backfeeding required.
The outdoor enclosure has
a slide hinge door for the
easiest installation and can
be removed by backing out
only one screw.
Mounting tabs on the
trim hold it in place on
the load center, freeing
up both hands to drive
the trim screws.
Invertible for bottom
feed application
Copper Bus
“Swiss Cheese”
style neutral
bars provide
multiple 1/0
connection
points.
All units include factory installed
ground bar and isolated neutral.
Outboard neutral and groundbars
allow for all nuetral and ground
connections to be located away from
the breaker connections, making for a
neat, clean installation