Service manual

Compressor Compact Disassembling and assembling
E382 EH81E 061 01 03 02 Siemens-Elema AB 33
Water separator 2
To remove water separator 2
• Open the front cover and remove the rear
cover and the casing as described in the
section Compressor covers.
• Disconnect the water tube (1) from the
metal bowl.
• Unscrew the metal bowl (2).
• Remove the plastic shield (3) and the filter
insert (4). Note – The filter insert (4) and
the O-ring (5) must be replaced at the
8000 hour overhaul.
• Disconnect the air tube (6).
• Use a 14 mm open-end wrench to unscrew
the water separator housing (7).
To refit water separator 2
• The procedure for refitting water separator
2 is the reverse of the removal procedure
previously described.
4
5
6
7
1
2
3
COMP027X