Data Sheet for Product

3
Siemens Industry, Inc.
A6V10502840
Smart Infrastructure
2020-07-31
● Blinds – one or two separate zones
– Manual control: Up, Down, Predefined positions
– Occupancy control and Vacancy control
– Glare Protection
– Energy efficiency functions including solar radiation optimization
– Slat angle
– Scene control
Pre-loaded Application Options
Fan coil unit
● Single, multiple or variable speed fan control.
● Outside air damper control with economizer.
● Ventilation Control or Demand Control Ventilation (DCV) with separate outside air damper
(OAD) setpoints for each operational mode.
● Supply (discharge) air temperature control for modulation heating or cooling coils.
● Dehumidification control.
● Terminal coils: heating (hot water or electric), cooling (chilled water or DX) and
heating/cooling coil (2-pipe or 4-pipe).
● Radiant ceiling including Chilled beams and Radiator control.
Heat pump
● Heat Pump compressors: Single, multiple or variable speed.
● Air-to-air, water loop or ground water configurations.
● Single, multiple or variable speed fan control.
● Outside air damper control with economizer.
● Dehumidification control.
● Ventilation Control or Demand Control Ventilation (DCV) with separate outside air damper
(OAD) setpoints for each operational mode.
● Terminal heating coil (hot water or electric) or hot gas coil.
● Radiant ceiling including Chilled beams and Radiator control.
● Greenleaf energy efficiency determination and display.
● Configurable plant operating modes (heating, cooling, warm up, cool down, flush/purge, and
so on).
Functions
The selected application and its parameters as well as input and output configuration determine
the room automation station's functionality.
A detailed description of functionality is available in the ABT (Automation Building Tool) online
help.
Communication
● BACnet MS/TP
● USB connection for service and commissioning, firmware download, and LAN access.
● The following functions are available with the KNX PL-Link bus:
– Communication with room operator units, switches, sensors, actuators, and luminaires.
– Plug-and-play connection of Siemens field devices with KNX PL-Link.