Data Sheet for Product

2
Siemens Industry, Inc.
A6V10502840
Smart Infrastructure
2020-07-31
Features
Total Room Automation applications combining multiple disciplines (HVAC, lighting,
blinds/shading) into one comprehensive solution.
BTL Listed as a BACnet Advanced Application Controller (B-AAC) device.
Fully programmable using block programming.
Proven, pre-loaded applications.
Operational modes (Comfort, Standby, Economy, Protection, and so on).
Preconfigured applications
Fan Coil Unit (FCU)
FAN COIL 2-Pipe CW/HW and HW Valves
FAN COIL 4-Pipe CW and HW Valves
FAN COIL staged DX Cooling and staged Heating
FAN COIL with CW and staged Electric Heat
FAN COILUNIT VENT with CW, HW and Outside Air Damper (OAD) control
FAN COILUNIT VENT with CW, ELEC and OAD control
FAN-COIL-UNIT VENT with DX, HW and OAD control
FAN COIL-UNIT VENT with DX, ELEC and OAD control
Chilled Beam
Chilled Beam Passive 2 Pipe Heating/Cooling and Radiator 1-Stage Electric
Heat Pump
HP Variable Speed, Two Stage Elec Heat and One Stage Elec Rad with OAD
HP Variable Speed, Water Source, HW Heat and Modulating Elec Rad with OAD
HP Single Stage, One Stage Elec Heat and HW Rad with OAD
HP Multi Stage, Two Stage Elec Heat and HW Rad with OAD
HP Multi Stage, Hot Gas Reheat, One Stage Elec Heat and HW Rad with OAD
HP Multi Stage, Ground Source, Hot Gas Reheat, One Stage Elec Heat and HW Rad with
OAD
Additional Applications
Electrical terminal heating coils, PWM, single, multi-stage or analog
Terminal fans, single, multi-stage or analog
Chill water, DX or hot water coils and heating/cooling coils (2-pipe or 4-pipe)
Variable Air Volume (VAV), Dual Duct and Fan Powered VAV (FPB)
Radiant ceiling including Chilled beams, cooling, heating and heating/cooling (2-pipe or 4-
pipe) control
Radiator/Baseboard: hot water, steam or electric
Lighting up to four separated or overlapping zones
Manual switching and dimming
Occupancy control and Vacancy control
Automatic Daylight Harvesting - step or constant level control
Stairwell lighting
Scene control