Commissioning Instructions

17
Restricted
A6V12093876
Configure Central Function for Central Common
Functions
1. Choose the Central Common Function.
2. Choose the following: Central operatinig mode
3. Click the drop down and change None to Active.
4. Choose the following: Optimum start stop control
5. Click the drop down and change the setting from None to Active.
6. Choose the following: Operating mode switch-on delay 1
(if needed, select addional Operating mode swith-on delay(s) for
additional groups.)
7. Click the drop down and change the setting from None to Active.
8. Choose the Default Values task.