Application

Room Functions
Room Operator Unit
38
Siemens Industry, Inc.
Application Note
A6V11692055
Smart Infrastructure – Building Products
2019-04-01
Enable operation: fan speed setpoint ✳
Enable operation: fan speed setpoint defines if the fan speed is displayed and if the
user can change the fan speed.
Yes: The fan speed is displayed and you can change it.
Key 3:
No: The fan speed is not displayed and you cannot change it.
Enable operation: room humidity setpoint ✳
Enable operation: room humidity setpoint defines if the relative humidity setpoint is
displayed and if the user can change it.
Yes: The relative humidity setpoint is displayed and you can change it. This setting
is only meaningful if the sensor for relative room humidity is enabled.
Navigation:
No: The relative humidity setpoint is not displayed and you cannot change it.
Enable operation: air quality setpoint ✳
Enable operation: air quality setpoint defines if the air quality setpoint is displayed
and if the user can change it.
Yes: The air quality setpoint is displayed and you can change it. This setting is only
meaningful if the sensor for room air quality is enabled.
Navigation:
No: The air quality setpoint is not displayed and you cannot change it.
Enable operation: temporary comfort ✳
Enable operation: temporary comfort defines if the user can use Key 8 to set the
room into temporary Comfort mode for a configurable time (120 minutes default).
Key 8:
Yes: The user can set the room into temporary Comfort mode. (this is the default
configuration for preloaded templates)
No: The user cannot set the room into temporary Comfort mode.
Note
If configuring a completely new template in ABT Site, this parameter must be
selected and enabled (set to Yes) if temporary Comfort mode by pressing Key 8 is
the desired behavior. Note that since Key 8 is used for both temporary Comfort and
also for Presence button, only one can be configured as active – see Startup
document for how to configure.
Enable operation: presence button ✳
Enable operation: presence button defines if the user can confirm his presence by
pressing key 8.
Key 8:
Yes: The user can confirm his presence by pressing key 8 (activates Comfort
mode).
Presence can be toggled from On to Off by re-pressing Key 8 (deactivates Comfort
mode).