Data Sheet for Product

Siemens Industry, Inc.

A6V10502834

2020-07-31

Outputs

Analog Outputs

0 to 10V Max. 1 mA

Digital Outputs

Type (Switching outputs triacs) High side

The Triac closes the contact to AC 24V

Switching voltage AC 24V

Permissible load 250 mA/6 VA per output (cos phi 0.35)

(500 mA/12 VA per output with PWM*)

Protection Short-circuit proof

AC 24V outputs for field devices (2: V~)

Output voltage AC 24V

Permissible load 500 mA/12 VA overall

Protection against overload Short-circuit proof

Connections

Interfaces

MSTP Interface type: RS485

Galvanic isolation: Yes

Baud rates: 9600, 19200, 38400, 57600, 115200

Protocol: BACnet over MS/TP

Short-circuit proof Protection against faulty wiring at max. AC 24V

USB (2.0) Plug: Type B

Data rate: 12 Mbps

KNX PL-Link Type: KNX TP1 PL-Link, galvanic isolation

Baud rate: 9.6 kbps

Bus power: 50 mA

Short-circuit proof Protection against faulty wiring at max. AC 24V

Wiring connections

Pluggable screw terminals Copper wire or copper strands with ferrules

1 x 0.6 mm dia. to 2.5 mm2 (22 to 14 AWG) or

2 x 0.5 mm dia. to 1 mm2 (24 to 18 AWG)

Copper strands without ferrules

1 x 0.6 mm dia. to 2.5 mm2 (22 to 14 AWG) or

2 x 0.5 mm dia. to 1.5 mm2 (24 to 16 AWG)

Slotted screws Small 1/8” blade, tightening torque 0.6 Nm (0.44 lb-ft)

Wiring lengths for signals KNX PL-Link 80 m (260 ft) with internal bus power or 300 m (990 ft)

with external power supply

MS/TP 1,000 m (3,290 ft)

Signal lines 80 m (260 ft)

For inputs AI 100 KΩ, AI NTC10K, AI NTC100K:

30 m (100 ft) or 80 m (260 ft), if shielded.