Application

Application Notes
Dual Duct Sequence Configurations
5
Siemens Industry, Inc.
Application Note
A6V11692053
Smart Infrastructure – Building Products
2019-04-01
Application Notes
This document should be used in conjunction with the VAV Start-up document
(A6V10665935) and the "Application Help" in ABT Site. Application Help describes
application types installed in the ABT Site library and lists all configuration items
found in a specific template or type.
How to find Application help in ABT Site
To understand how to access Application Help, click the Help button in ABT Site
(upper right) and go to Configuration > Application configuration. (see "Title and
toolbar")
Templates
This application template is factory preloaded into the DXR2 automation station,
or it can also be manually loaded using ABT Site. A template can be used as a
starting point for the creation of other similar templates, using ABT-Site.
Changing or adjusting parameters and setpoint values does not require a new
template number, but if a physical input or output is changed, a new 5-digit
template number should be assigned.
Application parameters and settings can be modified to meet specific jobsite
requirements such as: room setpoints, room airflow rates, room operating modes,
actuator timing, and so on. Important parameters fall into two main categories:
1) Individual BACnet configuration values such as setpoints for room temp and air
quality.
2) ABT-Inside commissioning parameters such as those used for air component
calibration or to tailor features of selected application functions.
If the default application does not meet job requirements, an application can be
configured and modified to job specifications using ABT Site.
The Room / Room segment concept
Familiarity with the Room / Room segment concept will be helpful when reading
this document. See the "Room/segment" topic under Technical principles in ABT
Site help.