Data Sheet for Application

Application Sheet
CEN002
Central function facade
DXR2.E18-101A
DXR2.E18-102A
4 / 4
Technical information in this document are subject to change. Drawings serve illustration purposes only.
Siemens is not responsible for content and any manual modifications.
2021-09-01
A6V10662238_en--_d_--_06
Engineering
• The ABT Site engineering tool is required to engineer DXR2 automation stations.
• See the Siemens Download Center www.siemens.com/bt/download for the latest application configurations and
workflow tutorials.
• Measurements for anti-glare protection are typically made in three cardinal points since most commonly available
brightness sensors have a horizontal coverage of 90°.
In general:
Building position north of the Equator
Sensor orientation to the east, south, west
Building position south of the Equator
Sensor orientation to the east, north, west
A more detailed consideration of the sensor orientation is required if the project is located near the artic circles.
On common Internet search machines, a search for "suncalc" provides useful information on the simple definition
of sensor orientation.
Issued by
Siemens Switzerland Ltd
Smart Infrastructure
Global Headquarters
Theilerstrasse 1a
CH-6300 Zug
[phone]
www.siemens.com/buildingtechnologies
© 2016 Siemens Switzerland Ltd
Subject to change