User Manual

Application Sheet CBA001
Active chilled beam with KNX PL-Link VAV controller, cooling coil
and hot water radiator on triac output
DXR2..18-
101A
DXR2..18-
102A
6 / 6
Technical information in this document are subject to change. Drawings serve illustration purposes only.
Siemens is not responsible for content and any manual modifications.
2019-02-21
A6V10662238_en--_b_--_10
Engineering ∂ ABT Site engineering tool is required to configure the DXR2 automation stations.
∂ See the Siemens Download Center at www.siemens.com/bt/download for the latest application configuration and
workflow tutorials.
∂ Option combination according to available on-board I/Os on controller.
∂ B1 (optional extract air temperature sensor) must be configured under ,Room temperature’ in order to serve for
room temperature control.
∂ D2
a
(on-board presence detector) to be configured in ABT Site under ‚Presence detector 2‘ for maximum
combination of optional devices.
Type of operation (NO or NC). Multiple devices of the same type can be connected.
Management
station
Sample presentation of an active chilled beam with hot water radiator application on the Desigo CC management
station.
Siemens Switzerland Ltd
Building Technologies Division
International Headquarters
Gubelstrasse 22
CH-6301 Zug
Tel. [phone]
Fax [phone]
www.siemens.com/buildingtechnologies
© 2017 Siemens Switzerland Ltd
Subject to change