Data Sheet for Application

Application Sheet
CEN001
Central function weather station
DXR2..18-101A
DXR2..18-102A
4 / 4
Technical information in this document are subject to change. Drawings serve illustration purposes only.
Siemens is not responsible for content and any manual modifications.
2021-09-01
A6V10662238_en--_d_--_05
Standard values
Parameter
Values/range
Template settings
Wind protection
Command when exceeding limit
None
Open
Height 25 %, angle undefined
Height 50 %, angle undefined
Height 75 %, angle undefined
Height 100 %, angle 0 %
Height 100 %, angle 25 %
Height 100 %, angle 50 %
Closed
Open
Precipitation protection
Command when exceeding limit
None
Open
Height 25 %, angle undefined
Height 50 %, angle undefined
Height 75 %, angle undefined
Height 100 %, angle 0 %
Height 100 %, angle 25 %
Height 100 %, angle 50 %
Closed
None
Frost protection
Command when exceeding limit
None
Open
Height 25 %, angle undefined
Height 50 %, angle undefined
Height 75 %, angle undefined
Height 100 %, angle 0 %
Height 100 %, angle 25 %
Height 100 %, angle 50 %
Closed
Open
Engineering
• The ABT Site engineering tool is required to engineer DXR2 automation stations.
• See the Siemens Download Center www.siemens.com/bt/download for the latest application configurations and
workflow tutorials.
• The outside sensor can also be used together with the weather station with analog and digital signals.
• Protection settings for facade products:
Parameter
Awnings
Blinds (template settings)
Precipitation protection; command
for exceeding limit
Closed
None
Frost protection; command for
exceeding limit
None
Open
Issued by
Siemens Switzerland Ltd
Smart Infrastructure
Global Headquarters
Theilerstrasse 1a
CH-6300 Zug
[phone]
www.siemens.com/buildingtechnologies
© 2016 Siemens Switzerland Ltd
Subject to change