User Manual

Application Sheet CEN001
Central function weather station
DXR2..18-
101A
DXR2..18-
102A
4 / 4
Technical information in this document are subject to change. Drawings serve illustration purposes only.
Siemens is not responsible for content and any manual modifications.
2019-02-21
A6V10662238_en--_c_--_05
Standard values
Parameter Values/range Template settings
Wind protection Command when exceeding limit None
Open
Height 25 %, angle undefined
Height 50 %, angle undefined
Height 75 %, angle undefined
Height 100 %, angle 0 %
Height 100 %, angle 25 %
Height 100 %, angle 50 %
Closed
Open
Precipitation protection Command when exceeding limit None
Open
Height 25 %, angle undefined
Height 50 %, angle undefined
Height 75 %, angle undefined
Height 100 %, angle 0 %
Height 100 %, angle 25 %
Height 100 %, angle 50 %
Closed
None
Frost protection Command when exceeding limit None
Open
Height 25 %, angle undefined
Height 50 %, angle undefined
Height 75 %, angle undefined
Height 100 %, angle 0 %
Height 100 %, angle 25 %
Height 100 %, angle 50 %
Closed
Open
Engineering ∂ The ABT Site engineering tool is required to engineer DXR2 automation stations.
∂ See the Siemens Download Center www.siemens.com/bt/download for the latest application configurations and
workflow tutorials.
∂ The outside sensor can also be used together with the weather station with analog and digital signals.
∂ Protection settings for facade products:
Parameter Awnings Blinds (template settings)
Precipitation protection; command
for exceeding limit
Closed None
Frost protection; command for
exceeding limit
None Open
Siemens Switzerland Ltd
Building Technologies Division
International Headquarters
Gubelstrasse 22
CH-6301 Zug
Tel. [phone]
Fax [phone]
www.siemens.com/buildingtechnologies
© 2016
Siemens Switzerland Ltd
Subject to change