User Manual

Application Sheet CEN003
Central function HVAC supply, lighting and blinds operation
DXR2..18-
101A
DXR2..18-
102A
5 / 6
Technical information in this document are subject to change. Drawings serve illustration purposes only.
Siemens is not responsible for content and any manual modifications.
2019-02-21
A6V10662238_en--_c_--_07
Application
configuration
Equipment Values/range Template settings
Central HVAC function Supply chain hot water 1 None
Active
Active
Supply chain hot water 2 None
Active
Active
Supply chain chilled water 1 None
Active
Active
Condensation prevention 1 None
Active
Active
Changeover function 2-pipe 1 None
Active
Active
Free cooling 1 None
Active
Active
Supply chain chilled water 2 None
Active
Active
Condensation prevention 2 None
Active
Active
Changeover function 2-pipe 2 None
Active
Active
Free cooling 2 None
Active
Active
Supply chain air None
Active
Active
Relief function None
Active
Active
Supply air temperature setpoint
determination
None
Active
Active
Changeover condition determination
air
None
Active
Active
Dew point evaluation None
Active
Active
Evaluation room air humidity None
Active
Active
VAV override None
Active
Active
Optional
configuration
Equipment Values/range Template settings
On-board input Operating mode switch 1 None
D1; Normally open
X3; Normally open
D1; Normally open
Operating mode switch 2 None
D2; Normally open
X4; Normally open
D2; Normally open
Operating mode switch 3 None
X3; Normally open
X3; Normally open
Operating mode switch 4 None
X4; Normally open
X4; Normally open
KNX PL-Link device Light switch 1 None
UP 220/31; 2 x dimming
UP 221/2; 1 x dimming
UP 221/3; 1 x dimming
UP 285/2; 1 x dimming
UP 285/3; 1 x dimming
UP 220/31; 2 x dimming