User Manual

Application Sheet CEN002
Central function facade
DXR2.E18-101A
DXR2.E18-102A
4 / 4
Technical information in this document are subject to change. Drawings serve illustration purposes only.
Siemens is not responsible for content and any manual modifications.
2019-02-21
A6V10662238_en--_c_--_06
Engineering ∂ The ABT Site engineering tool is required to engineer DXR2 automation stations.
∂ See the Siemens Download Center www.siemens.com/bt/download for the latest application configurations and
workflow tutorials.
∂ Measurements for anti-glare protection are typically made in three cardinal points since most commonly available
brightness sensors have a horizontal coverage of 90°.
In general:
Building position north of the Equator Sensor orientation to the east, south, west
Building position south of the Equator Sensor orientation to the east, north, west
A more detailed consideration of the sensor orientation is required if the project is located near the artic circles.
On common Internet search machines, a search for "suncalc" provides useful information on the simple definition
of sensor orientation.
Siemens Switzerland Ltd
Building Technologies Division
International Headquarters
Gubelstrasse 22
CH-6301 Zug
Tel. [phone]
Fax [phone]
www.siemens.com/buildingtechnologies
© 2016 Siemens Switzerland Ltd
Subject to change