User Manual

Application Sheet CEN002
Central function facade
DXR2.E18-101A
DXR2.E18-102A
3 / 4
Technical information in this document are subject to change. Drawings serve illustration purposes only.
Siemens is not responsible for content and any manual modifications.
2019-02-21
A6V10662238_en--_c_--_06
Application
configuration
Equipment Values/range Template settings
On-board input Outside brightness east None
X1; 0 …10 V
X1; 0 …10 V
Outside brightness south None
X2; 0 …10 V
X2; 0 …10 V
Outside brightness west None
X3; 0 …10 V
X3; 0 …10 V
Solar radiation None
X4; 0 …10 V
X4; 0 …10 V
Optional
configuration
Equipment Values/range Template settings
Central shading
function
Facade switch-on delay 1 east None
Active
None
Facade switch-on delay 2 east None
Active
None
Facade switch-on delay 3 east None
Active
None
Facade switch-on delay 1 south None
Active
None
Facade switch-on delay 2 south None
Active
None
Facade switch-on delay 3 south None
Active
None
Facade switch-on delay 1 west None
Active
None
Facade switch-on delay 2 west None
Active
None
Facade switch-on delay 3 west None
Active
None
Variants
Configuration
Equipment Values/range Template settings
On-board input Outside brightness north None
X4; 0 …10 V
None
Standard values
Parameter Values/range Template settings
Central facade shading
east
Northern latitude 47.17 degrees
Eastern longitude 8.52 degrees
Azimuth angle of the facade 90 degrees
Facade incline 90 degrees
Central facade shading
south
Northern latitude 47.17 degrees
Eastern longitude 8.52 degrees
Azimuth angle of the facade 180 degrees
Facade incline 90 degrees
Central facade shading
west
Northern latitude 47.17 degrees
Eastern longitude 8.52 degrees
Azimuth angle of the facade 270 degrees
Facade incline 90 degrees