User Manual

Application Sheet HP001
Heat pump, variable fan, reversing valve, 2-stage electric heating,
1-stage electric radiator and outside air damper
DXR2..18-102
A
5 / 6
Technical information in this document are subject to change. Drawings serve illustration purposes only.
Siemens is not responsible for content and any manual modifications.
2019-02-21
A6V10662238_en--_b_--_11
Application
configuration
Equipment Values/Range Template settings
Heat pump fault 1 (D1) D1; Normally closed
D2; Normally closed
X1; Normally closed
X2; Normally closed
X3; Normally closed
X4; Normally closed
X1; Normally closed
Condensate level monitor (D3) D1; Normally closed
D2; Normally closed
X1; Normally closed
X2; Normally closed
X3; Normally closed
X4; Normally closed
D1; Normally closed
KNX PL-Link devices Room operator unit device 1 (R1) QMX3.P02, QMX3.P34, QMX3.P36, QMX3.P37,
QMX3.P74, QMX2.P33, QMX2.P43
QMX3.P74
Optional
configuration
Equipment Values/Range Template settings
On-board output
On-board input Supply air temperature (B3) X2; LG-Ni1000
X2; 0...10 V
X2; NTC 100k
X2; NTC 10k
X2; T1 (PTC)
X2; Pt1000 (EU)
X2; Pt1000 (NA)
X2; LG-Ni1000
Mixed air temperature (B2) X1; LG-Ni1000
X2; LG-Ni1000
X3; LG-Ni1000
X4; LG-Ni1000
X1; 0...10 V
X2; 0...10 V
X3; 0...10 V
X4; 0...10 V
X1; NTC 100k
X2; NTC 100k
X3; NTC 100k
X4; NTC 100k
X1; NTC 10k
X2; NTC 10k
X3; NTC 10k
X3; NTC 10k
X4; NTC 10k
X1; T1 (PTC)
X2; T1 (PTC)
X3; T1 (PTC)
X4; T1 (PTC)
X1; Pt1000 (EU)
X2; Pt1000 (EU)
X3; Pt1000 (EU)
X4; Pt1000 (EU)
X1; Pt1000 (NA)
X2; Pt1000 (NA)
X3; Pt1000 (NA)
X4; Pt1000 (NA)
X3; LG-Ni1000
KNX PL-Link devices Sensor device 1…4 (D4) UP 258D12; Presence detector UP 258D12; Presence
detector