Manualshelf

Commissioning Instructions

ManualsBrandsSiemens ManualsBuilding automationDual Duct Variable Volume with Dedicated Ventilation Duct, Two Inlet Sensors, DCV and Hot Water Heat with Supply Temp Control (Template 14064)
12345678910
DXR Template Feature Selections
8
Step 4 – HVAC Configuration
Confirm / Set HVAC to Active.
For HVAC configuration, select functions for Supply air VAV, Extract air VAV, and
Heating coil (see figure).
Step 5 – Room Segment (Auxiliary functions)
Hvac FDD can now be set to Active.
Up to four fault types can be selected. Select Active to enable each that is required to
meet your job specifications. This will enable the fault and diagnostic program module
in the DXR application and provide the BACnet object(s) used to monitor the fault(s).