Manualshelf

Application

ManualsBrandsSiemens ManualsBuilding automationDual Duct Variable Volume with Dedicated Ventilation Duct, Two Inlet Sensors, DCV and Hot Water Heat with Supply Temp Control (Template 14064)
31323334353637383940
Room Functions
Room Operator Unit
36
Siemens Industry, Inc.
A6V11692055
Smart Infrastructure – Building Products
2019-04-01
Display outside air temperature: Only the outside temperature is displayed.
Navigation: , Key 1:
Display room & outside air temp.: The room temperature and the outside
temperature are displayed. Toggling between the values is enabled. This setting is
only meaningful if the room temperature sensor is enabled.
Navigation: , Key 1:
Room unit, display humidity ✳
Room unit, display humidity defines which relative humidity values can be
displayed.
None: Neither the room relative humidity nor the outside relative humidity is
displayed.
Display room humidity: Only the room relative humidity is displayed. This setting is
only meaningful if the sensor for relative room humidity is enabled. The display is
the average of all configured/valid room humidity sensors (PL-Link or hardwired)
from all room segments combined into a Room configuration.
Navigation: , Key 1:
Display outside air humidity: Only the outside relative humidity is displayed.
Navigation: , Key 1:
Display room & outside humidity: The room relative humidity and the outside
relative humidity are displayed. Toggling between the values is enabled. This
setting is only meaningful if the sensor for relative room humidity is enabled.
Navigation: , Key 1:
Room unit, display windows status ✳
Room unit, display windows status enables or disables the indication that a window
is open. If a window is open, the connected window switch is active.
Yes: If a window is open, the icon for the open window is displayed.
No: If a window is open, no icon is displayed.
Room unit, display air quality ✳
Room unit, display air quality defines which air qualities can be displayed.
None: No air quality is displayed.
Display room air quality: The air quality of the room is displayed. This setting is
only meaningful if the sensor for room air quality is enabled. The display is the
average of all configured/valid room air quality sensors (PL-Link or hardwired)