Data Sheet for Product

3
Siemens Industry, Inc.
A6V10502844
Smart Infrastructure
2021-07-19
● Blinds – one or two separate zones
– Manual control: Up, Down, Predefined positions
– Occupancy control and Vacancy control
– Glare Protection
– Energy efficiency functions including solar radiation optimization
– Slat angle
– Scene control
Pre-loaded Application Options
● Separate maximum and minimum flow setpoints for both heating and cooling control.
● Separate minimum ventilation flow setpoints for each occupancy mode.
● CO2 sensor and Demand control ventilation with maximum ventilation flow setpoint.
● Flexible occupancy modes: Comfort, Pre-Comfort, Economy and Protection.
● Supply (discharge) air temperature control for modulating heating or cooling coils.
● Configurable occupancy sensor control.
● Relative humidity sensor and room dew point calculation.
● Greenleaf energy efficiency determination and display.
● Configurable plant operating modes (heating, cooling, warm up, cool down, flush/purge,
and so on).
Functions
The selected application and its parameters as well as input and output configuration
determine the room automation station's functionality.
A detailed description of functionality is available in the ABT (Automation Building Tool)
online help.
Communication
● 2-Port Ethernet switch for cost-effective cabling via line topology.
● USB connection for service and commissioning, firmware download, and LAN access.
● The following functions are available with the KNX PL-Link bus:
– Communication with room operator units, switches, sensors, actuators, and
luminaires.
– Plug-and-play connection of Siemens field devices with KNX PL-Link.
– Integration of common devices using KNX S-Mode (ETS engineering required).