Assortment / System Description

Product range over
view
1
12 | 275 A6V10866237_en--_b_08
This operator panel manually operates 2 KNX
PL-Link light outputs and 2 KNX PL-Link blinds
outputs,
requiring 4 horizontal button pairs.
● Switch off + Dim lighting
● Switch on + Make lighting brighter
● Blinds down
● Blinds up
This operator panel manually operates 4 KNX
PL-Link light outputs and 2 KNX PL-Link blinds
outputs.
It requires 4 individual buttons and 2 horizontal
button pairs.
● Switch on/off lighting
● Blinds down
● Blinds up
Sensor devices QMX3.P70 and AQR2535NNWQ indicate room air quality (CO
2
concentration) using a multicolor LED (air quality indicator) in green, orange, or
red.
The indication can be displayed on all LCD versions as a value or symbol.
The UP 258D12 is both a presence and motion detector. It communicates with
the DXR2 room automation station over the KNX PL-Link and is designed for
mounting on the ceiling and be targeted at the required detection area thanks
to the movable sensor hear.
Figure: Presence detector UP258D12
The VAV compact controllers GDB181.1E/KN and GLB181.1E/KN are designed
to control a variable or constant air flow. The devices communicate with the
DXR2 room automation station over the KNX PL-Link.
The rotary actuator GDB111.9E/KN is designed to control a 6-port control ball
valve. The device communicates with the DXR2 room automation station over
the KNX PL-Link.
2 x Light dimming
2 x Blinds
4 x Light dimming
2 x Blinds
Air quality indication
Presence detector
KNX PL-Link
Actuators
KNX PL-Link