Environmental Declaration

EPD - Type II
Based on ISO 14021
Building Parts
PA/CuZn/Fe Connector 4-pole grey variant
PA/CuZn/Fe Connector 4-pole orange variant
paper Double-self-adhesive label 1g
FR4; TBBA; solder SnAgCu Mainboard variant
FR4; TBBA; solder SnAgCu CPU board 9g
*Variant parts list
[g]
Total weight of device
Connector 2-pole green
Connector 6-pole grey
Connector 2-pole grey
Connector 8-pole grey
Connector 4-pole grey
Connector 4-pole orange
Mainboard
Comments
A5W00047079_AB_en 12.04.2021
DXR2.E09../BP
375
DXR2.E09T../BP
367
DXR2.E10../BP
375
7
7
4
22
136
7
7
4
22
136 136
DXR2.E09../TB
334
128
15
7
4
11
4
EU-directive 2011/65/EU (RoHS)
The device does not contain substances in concentrations and applications banned under the EU RoHS Directive, including the 4 phthalates added to Annex
II in 2015.
The device contains the following substances of the candidate list according to Article 59 (1, 10) of the regulation (EC) No. 1907/2006 concerning the
Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) in concentrations above 0.1 % w/w. Contained REACH candidate substances,
including those which will become known at a later date, are listed on the delivery note.
Lead, CAS-Nr.7439-92-1; Silicic acid, lead salt, CAS-Nr.11120-22-2; Lead monoxide, CAS-Nr.1317-36-8
(Status according to the creation date of this document.)
Please contact your local Siemens branch office to get further information on environmental aspects and disposal.
Legal Disclaimer: This declaration is for information purpose only.
Siemens Schweiz AG therefore does not assume liability for any error or for any consequences which may arise from the use of this information to the maximum extent under
the law.
This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that the product will retain a particular
composition for a particular period.
Regulation (EC) No. 1907/2006 (REACH)
The device is low-halogen with exception of:
PCB (TBBA)
The device is classified as waste electronic equipment in terms of the European Directive 2012/19/EU (WEEE) and must
not be disposed of as unsorted municipal waste. Regarding disposal, use the systems setup for collecting electronic waste.
Observe all local and applicable laws.
Disposal
PCBAs (Printed Circuit Board
assembled)
Restricted Page 2/2