User Manual

Application Sheet CBP002
Passive chilled/heating beam (2 pipe) with changeover on triac
output
DXR2..09T-101A
4 / 6
Technical information in this document are subject to change. Drawings serve illustration purposes only.
Siemens is not responsible for content and any manual modifications.
2019-02-21
A6V10662233_en--_b_--_09
Application
configuration
Equipment Values/Range Template settings
On-board output Chilled/heating beam valve position 1 Chilled; Y1, Y2; 3-position
Chilled; Y3, Y4; 3-position
Chilled; Y1; Pulse width modulation thermal
Chilled; Y4; Pulse width modulation thermal
Heating/chilled 2-pipe; Y1, Y2; 3-position
Heating/chilled 2-pipe; Y3, Y4; 3-position
Heating/chilled 2-pipe; Y1; Pulse width
modulation thermal
Heating/chilled 2-pipe; Y4; Pulse width
modulation thermal
Heating; Y1, Y2; 3-position
Heating; Y3, Y4; 3-position
Heating; Y1; Pulse width modulation thermal
Heating; Y4; Pulse width modulation thermal
Chilled beam passive; Y1, Y2; 3-position
Chilled beam passive; Y3, Y4; 3-position
Chilled beam passive; Y1; Pulse width
modulation thermal
Chilled beam passive; Y4; Pulse width
modulation thermal
Heat/chilled beam passive 2-pipe; Y1, Y2; 3-
position
Heat/chilled beam passive 2-pipe; Y3, Y4; 3-
position
Heat/chilled beam passive 2-pipe; Y1; PWM
thermal
Heat/chilled beam passive 2-pipe; Y4; PWM
thermal
Heat/chilled beam passive
2-pipe; Y1, Y2; 3-position
KNX PL-Link devices Room operator unit device 1 QMX3.P02, QMX3.P34, QMX3.P36, QMX3.P37,
QMX3.P74
QMX3.P34