User Manual

ManualsBrandsSiemens ManualsRoom controlsFan coil unit with staged fan, 6-way heating/cooling coil (4 pipe) on analog output, DXR2.E09-101A

Application Sheet RAD012

Hot water radiator on analog output

DXR2..09-

101A

1 / 6

Technical information in this document are subject to change. Drawings serve illustration purposes only.

Siemens is not responsible for content and any manual modifications.

2019-02-21

A6V10662231_en--_c_--_07

∂ Heating with LTHW radiator

∂ Modulating control of heating valve on analog output

∂ Downdraft compensation

∂ Room temperature operation via KNX PL-Link room operator unit with temperature measurement

Plant diagram

DXR2… Room automation station R1 Room operator unit with

D1 Window contact temperature sensor

D2 Presence detector YR1 Radiator valve 1

R Room YR2 Radiator valve 2

Function diagrams Heating valve

H Heating sequence Y Output signal

SpH Effective heating setpoint YH Heating valve

TR Room temperature

Summary of content (6 pages)

PAGE 1
Application Sheet RAD012 DXR2..
PAGE 2
Application Sheet RAD012 DXR2..09-101A Hot water radiator on analog output Description of functions Basic functions ∂ PID control for heating. ∂ 0...10 V valves controlled by analog outputs for heating. ∂ The temperature is measured in the room operator unit. ∂ The application allows customers to adjust the room temperature setpoints via the room operator unit. ∂ The operating modes are Comfort, Pre-Comfort, Economy and Protection.
PAGE 3
Application Sheet RAD012 DXR2..09-101A Hot water radiator on analog output Variants Legend Type of unit Data sheet Product No. Qty. R1a KNX PL-Link wall-mount room sensor for temperature N1602 QMX3.P30 1 R1b KNX PL-Link flush-mount room operator unit N1601 QMX3.
PAGE 4
Application Sheet RAD012 DXR2..09-101A Hot water radiator on analog output Application configuration On-board output Equipment Radiator valve position 1 KNX PL-Link devices Room operator unit device 1 Values/Range Template settings Water; Y20; 0...10 V Water; Y20; 0...10 V Water; Y30; 0...10 V Electric modulating; Y20; 0...10 V Electric modulating; Y30; 0...10 V QMX3.P02, QMX3.P34, QMX3.P36, QMX3.P37, QMX3.P34 QMX3.
PAGE 5
Application Sheet Hot water radiator on analog output Engineering RAD012 DXR2..09-101A ∂ ABT Site engineering tool is required to configure the DXR2 automation stations. ∂ See the Siemens Download Center at www.siemens.com/bt/download for the latest application configuration and workflow tutorials. ∂ Option combination according to available on-board I/Os on controller. ∂ D2a (on-board presence detector) to be configured in ABT Site under ‚Presence detector 2‘ for maximum combination of optional devices.
PAGE 6
Siemens Switzerland Ltd Building Technologies Division International Headquarters Gubelstrasse 22 CH-6301 Zug Tel. +41 41-724 24 24 Fax +41 41-724 35 22 www.siemens.com/buildingtechnologies © 2015 Siemens Switzerland Ltd Subject to change 6/ 6 Technical information in this document are subject to change. Drawings serve illustration purposes only. Siemens is not responsible for content and any manual modifications.