Data Sheet for Application

Application Sheet
FCU044/FCU044_H
Fan coil unit with variable fan, heating and cooling coil (4 pipe) on
analog output
DXR2..09-101A
5 / 6
Technical information in this document are subject to change. Drawings serve illustration purposes only.
Siemens is not responsible for content and any manual modifications.
2021-09-08
A6V10662231_en--_d_--_03
Engineering
• ABT Site engineering tool is required to configure the DXR2 automation stations.
• See the Siemens Download Center at www.siemens.com/bt/download for the latest application configuration and
workflow tutorials.
• Option combination according to available on-board I/Os on controller.
• B1 (optional extract air temperature sensor) to be configured under ,Room temperature’ in order to serve for room
temperature control.
• D2
a
(on-board presence detector) to be configured in ABT Site under ‚Presence detector 2‘ for maximum
combination of optional devices.
Type of operation (NO or NC). Multiple devices of the same type can be connected.
Management
station
Sample presentation of a fan coil unit application on the Desigo CC management station.