User Manual

4
Siemens
A6V11393929_en--_d
Smart Infrastructure
2020-12-16
Equipment combinations
Product No.
Stock No.
Designation
Datasheet*
QMA1.N30H
S55499-D464
Room temperature sensor
for DXR1.. (without LCD)
A6V11393922
QMX1.M34H
S55499-D465
Room unit for DXR1.. (with
LCD)
A6V11393927
* The documents can be downloaded from http://siemens.com/bt/download by specifying the
Datasheet number as shown in the above table.
Product documentation
Topic
Title
Document ID:
Installation, cable length,
topology
Desigo Room Automation installation guide
CM111043
Engineering and commissioning
ABT online help
N/A
Installation instruction
Mounting instructions
A6V11393918
Commissioning
Quick guide
A6V11526405
Product environmental declaration
A6V11805930
EU declarations (CE)
A6V11791489
Documents such as environmental declarations, CE declarations, etc., can be downloaded
at the following Internet address:
http://siemens.com/bt/download
Notes
Security
CAUTION
National safety regulations
Failure to comply with national safety regulations may result in personal injury and property
damage.
● Observe national provisions and comply with the appropriate safety regulations.
● Use only properly trained technicians for mounting, commissioning and servicing.
Engineering
Identification
Each device has a unique serial number to ensure efficient commissioning. It is provided on
the adhesive barcode reader. The serial number can be read directly into the engineering
tool using a barcode reader.
Wiring
Wiring must be sufficiently insulated to the available rated voltage. Sizing and fusing of the
wiring depend on the connected load.
Mounting
The automation station is mounted directly on a damper shaft.