User Manual

Application Sheet
FPB053
Fan powered box with variable speed fan and staged electric reheater
DXR1.E10PL-113
6 / 11
Technical information in this document are subject to change. Drawings serve illustration purposes only.
Siemens is not responsible for content and any manual modifications.
2020-09-01
A6V11804340_en--_b
Application
configuration
Equipment
Channel/Signal
Settings example
On-board output
Supply air VAV position (integrated
actuator)
Y1, Y2; 3-position
Y1, Y2; 3-position
Fan speed
1-stage; Y4; Normally open
1-stage; Y6; Normally open
2-stage; Y3, Y4; Normally open
2-stage; Y5, Y6; Normally open
3-stage; Y4, Y5, Y6; Normally open
Variable speed fan; Y10; 0…10 V
Variable speed fan; Y10;
0…10 V
Enable fan speed
Y4; Normally open
Y6; Normally open
Y4; Normally open
Heating coil valve position
Water; Y3, Y4; 3-position
Water; Y5, Y6; 3-position
Water; Y3; Pulse width modulation spring return
Water; Y5; Pulse width modulation spring return
Water; Y10; 0...10 V
Electric 1-stage; Y3; Normally open
Electric 1-stage; Y5; Normally open
Electric 2-stage; Y3, Y4; Normally open
Electric 2-stage; Y5, Y6; Normally open
Electric 3-stage; Y3, Y4, Y5; Normally open
Electric 3-stage; Y4, Y5, Y6; Normally open
Electric modulating; Y10; 0...10 V
Electric 2-stage; Y5, Y6;
Normally open
On-board input
Supply air VAV differential air
pressure (integrated sensor) (YS)
P1
P1
Fan differential pressure (B8)
X1; 0...10 V
X2; 0...10 V
X1; 0...10 V
Heating coil over-temperature
detection (D4)
D1; Normally closed
X1; Normally closed
X2; Normally closed
X2; Normally closed
Window contact (D1)
D1; Normally closed
X1; Normally closed
X2; Normally closed
D1; Normally closed
KNX PL-Link devices
Room operator unit device 1 (R1)
QMX2.P33
QMX2.P43
QMX3.P34
QMX3.P74
QMX3.P74
Sensor device 2 (D2)
UP 258D12
UP 258D12
HVAC
Supply air VAV
Supply air VAV 12, press, duct area, ctr.
Supply air VAV 13, press, flow conv, ctr.
Supply air VAV 15, press, dependent ctrl.
Supply air VAV 13, press,
flow conv, ctr.
Fan speed
Single-speed fan 11
Multi-speed fan 11
Variable speed fan 11
Variable speed fan 12, air vol.flow ctrl
Variable speed fan 12, air
vol.flow ctrl
Heating coil
Hot water heating coil 11
Hot water heat.coil 12, sply.temp.ctrl.
Electric heating coil 11, mod.output
Electric heating coil 12, sply.temp.ctrl
Electric heating coil 13, 1 binary outp.
Electric heating coil 14, 2 binary outp.
Electric heating coil 15, 3 binary outp.
Electric heating coil 14, 2
binary outp.