Data Sheet for Product

Siemens A6V11393933_en--_c

Smart Infrastructure 2020-09-01

Outputs

Analog output

Control range 0…10 V

Resolution 5 mV

Output current Max. 1 mA

Triac outputs

Number of channels 4

Type Requires AC 24 V source to allow switching: switching

to phase (AC 24 V) or neutral (⏊)

Current rating 0.5 A max. per channel

Voltage rating AC 24 V +/-20 %

Max. load 12 VA per channel

Pressure sensor

Measurement range 0…500 Pa

Sample rate ≤ 500 ms

Overload range 0…100 kPa

Measuring range accuracy

Zero point accuracy

Resolution

3 %

0.2 Pa

12 Bit

Connections

Interfaces

Ethernet Plugs: dual RJ45, 10M/100M fast Ethernet

Interface type: IEEE 802.3 compliance

Cable type: 100 M STP CAT 5

USB (2.0) Type Micro B

KNX PL-Link Terminal: 5.08 mm, 2 pin

DPSU: 50 mA, non-standard DPSU

KNX PL-Link: Consider maximum bus load and different device types (two devices of the

same type are not supported).

Wiring connections

Wiring lengths for signals KNX PL-Link: max. 80 m with internal bus power

Signal lines: max. 80 m

For analog inputs: max. 30 m