User Manual

Application Sheet
VAV045
Supply and extract VAV with integrated damper actuator and
heating/chilled ceiling
DXR1.E10PL-112
11/24
Technical information in this document are subject to change. Drawings serve illustration purposes only.
Siemens is not responsible for content and any manual modifications.
2020-09-01
A6V11643426_en--_b
Engineering
ABT Site engineering tool is required to configure the DXR1 automation stations.
See the Siemens Download Center at www.siemens.com/bt/download for the latest application configuration and
workflow tutorials.
Option combination according to available on-board I/Os on controller.
B3 (optional extract air temperature sensor) to be configured under “Room temperature” in order to serve for
room temperature control.
D2
a
(on-board presence detector) to be configured in ABT Site under “Presence detector 2” for maximum
combination of optional devices. Type of operation (NO or NC). Multiple devices of the same type can be
connected.
Management
station
Sample presentation of a VAV application on the Desigo CC management station.
[UH] Would expect a picture that represents the configuration described in this application sheet.
Issued by
Siemens Switzerland Ltd
Smart Infrastructure
Global Headquarters
Theilerstrasse 1a
CH-6300 Zug
Tel. [phone]
www.siemens.com/buildingtechnologies
© 2019 Siemens Switzerland Ltd
Subject to change