Commissioning Instructions

Step 3 - Discovering Automation Stations
A6V11672234_en--_a
11 | 22
Step 3 - Discovering Automation Stations
3.1
Under Startup, click Configure and Download. Discovered devices tab
displays.
3.2
Opens the Discovery dialog box. You can choose to discover devices in the
Local network or the Remote network. Locally connected devices displays
only connected devices based on the network specified. Default is All
devices.
Once the devices have been discovered you have several options available. You
can:
● Command parameters on several automation stations (
Step 4)
● Command parameters and balance individual automation stations (
Step 5)
● Upload report data and create reports (
Steps 7 and 8)