Commissioning Instructions

Step 7 - Uploading Report Data
20 | 22
A6V11672234_en--_a
Step 7 - Uploading Report Data
7.1
Click the Report tab.
7.2
Select Air Balancer from the Report list dropdown. The table will display a
list of parameters to be uploaded. This table is read only.
7.3
Click the Discovered devices tab.
7.4
Select the automation station(s) to upload report data.
7.5
Click Upload report data. A report data file will be created for each selected
automation station.
The status of the upload for each automation station is displayed in the Log and
Job viewer.