Desigo™ Room Automation Compact actuating room automation stations, BACnet/IP, AC 24 V (Actuating DXR) DXR1.E09PDZ-112, DXR1.E09PLZ-112, DXR1.E09PDZ-113 Combination of room automation station and actuator for buildings with increasing demand on functionality and flexibility in Room Automation, VAV and FPB applications. ● ● ● ● ● ● ● ● ● A6V11393931_en--_d 2020-12-16 Compact, configurable room automation station in combination with actuator for HVAC QMX1.M34H room unit and QMA1.
Features Configurable The DXR1.. automation stations provide the infrastructure for systems and applicationspecific functions which can be configured. Compact series The compact build allows direct mounting on the damper shaft. It is designed for VAV and FPB. Plug-in terminal blocks Plug-in terminal blocks for easy exchange of room automation stations. Integrated actuator The actuator gear base is integrated into the housing of the actuating DXR. It supports dampers with up to 5 Nm torque.
LED Color Activity Function Run Green Steady ON Device is ready for operation Steady OFF Device is not powered Regular flashing Start-up or the program is stopped Steady OFF OK Steady ON Program error Hardware fault Rapid flashing Wrong or corrupt software No application loaded Blinking per wink command Physical device identification Red Service button (SVC) Physical identification on the network.
Type summary Product No. Stock No. Inputs Outputs Description Quantity DXR1.E09PDZ-112 S55499-D456 2 universal inputs 4 digital outputs, VAV application 1 analog output Single package / multiple package (10) DXR1.E09PLZ-112 S55499-D742 2 universal inputs 4 digital outputs, VAV application 1 analog output Single package / multiple package (10) DXR1.
Engineering Identification Each device has a unique serial number to ensure efficient commissioning. It is provided on the adhesive barcode reader. The serial number can be read directly into the engineering tool using a barcode reader. Wiring Wiring must be sufficiently insulated to the available rated voltage. Sizing and fusing of the wiring depends on the connected load. Mounting A6V11393929Z02 The automation station is mounted directly on a damper shaft.
Maintenance The controller is maintenance-free. Disposal The device is considered an electronic device for disposal in accordance with the European Guidelines and may not be disposed of as domestic garbage. ● Dispose of the device through channels provided for this purpose. ● Comply with all local and currently applicable laws and regulations. Warranty Technical data on specific applications are valid only together with Siemens products listed under "Equipment combinations".
Technical data Power data Power supply Operating voltage (SELV/PELV) AC 24 V +/-20% Frequency 50 or 60 Hz Power consumption 7 VA max. Transformer requirements and recommended voltages Type Class 2, AC 24 V, 50 / 60 Hz, SELV, PELV Functional data Functional data Nominal torque 5 Nm Nominal rotary angle 90 ° Maximum rotary angle 95 °± 2 ° Runtime for 90 °rotary angle 150 s Shaft size 8…16 mm, round 8…10 mm, round (with centering insert) 6…12.
Outputs Analog output Control range 0…10 V Resolution 5 mV Output current Max. 1 mA Triac outputs Number of channels 4 Type Requires AC 24 V source to allow switching: switching to phase (AC 24 V) or neutral (⏊) Current rating 0.5 A max. per channel Voltage rating AC 24 V +/-20 % Max. load 12 VA per channel Pressure sensor Pressure sensor Measurement range 0…500 Pa Sample rate ≤ 500 ms Overload range 0…100 kPa Measuring range accuracy Zero point accuracy Resolution 3% 0.
Ambient conditions and protection classification Degree of protection of housing to IEC EN 60529 Room automation station Climatic ambient conditions Transport (packaged for transport) as per IEC EN 60721-3-2 Operation as per IEC/EN 60721-3-3 Mechanical ambient conditions Transport as per IEC/EN 60721-3-2 Operation as per IEC/EN 60721-3-3 IP20 Class 2K3 Temperature -25...70 °C Air humidity 5...95 % (non-condensing) Class 3K5 Temperature -5...50 °C Air humidity 5...
Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. General General information 10 Siemens Smart Infrastructure Color Light gray Dimensions L × W × H = 137 × 143 × 82 mm Weight Net weight: 631.9 g Gross weight: 852.
Diagrams Connection terminals DXR1.E09PDZ-112 and DXR1.E09PDZ-113 Siemens Smart Infrastructure Pin Description Terminal 1, 2 IP connection USB USB interface 81...
Dimensions Dimensions in mm Issued by Siemens Switzerland Ltd Smart Infrastructure Global Headquarters Theilerstrasse 1a CH-6300 Zug Tel. +41 58 724 2424 www.siemens.com/buildingtechnologies 12 Siemens Smart Infrastructure Document ID A6V11393931_en--_d Edition 2020-12-16 © Siemens Switzerland Ltd, 2019 Technical specifications and availability subject to change without notice.
