User Manual

Connecting DXR1 to ABT Site
7
14 | 16
A6V11526405_en--_b
Command
Description
Set Max Master for all devices on
network (MS/TP only)
Allows the selected device to set the Max Master Address value
to all devices that support this command. A configured device
must be selected so that the set Max Master operation can be
issued to other devices on the network. The value can be set to a
specific value (1 through 127) or to Auto. The latter causes the
selected device to poll the network for the highest MAC address
and sets all devices to this value.
Notes:
1. This command applies only to DXR2.M (when working with
DXR1.M)
2. This command takes several minutes to complete.
Manually configure…
Opens the Manually configure dialog box.
Note:
You can also use the keyboard shortcut Ctrl-M to open the dialog
box.
Update firmware…
Loads the firmware and applications into the destination
device(s).
Upload
Uploads only the runtime instance data bundle for the selected
devices.
Backup
Allows you to back up the current device configuration.
Restore…
Opens the Restore device dialog box. Allows you to restore a
previous version of the device configuration (stored in DXR1..
devices).
You can restore to my backup or restore to precedent role
backup.
Note:
To restore to precedent role backup, you need to enable n-step
configuration by selecting Settings > User profile > Common
setting > Enable n-step configuration.