Data Sheet for Product

2
Siemens
A6V11393935_en--_d
Smart Infrastructure
2021-08-26
Features
Compact series
The compact build allows direct mounting on the damper shaft.
Plug-in terminal blocks
Plug-in terminal blocks for easy exchange of room automation stations.
Integrated actuator
The actuator gear base is integrated into the housing of the actuating DXR. It supports
dampers with up to 10 Nm torque.
Use
The Desigo Room Automation offers the highest level of flexibility for energy-optimized solu-
tions while satisfying requirements for temperature control, ventilation and comfort using
standard tools and established workflows.
Pre-installed application types
Variable (VAV) and constant air volume flow control
Functions
The selected application and its parameters as well as input and output configuration deter-
mine the room automation station’s functionality.
A detailed description of functionality is available in the ABT (Automation Building Tool)
online help.
Communication
● 2-port Ethernet switch for cost-effective cabling via line topology
Note: DXR1 supports cabling based on daisy chain topology. The max. number is 20 de-
vices and in the event of a failed automation station, all other stations are no longer
reachable. DXR1 can be cabled as ring topology if higher reliability is required. This re-
quires support for layer 2 switches RSTP (Rapid Spanning Tree Protocol) as well as
SNMP monitoring and that any loss of superposed system is reported. In the event of a
fault, switching the communication paths can take between 10 and 30 seconds. DXR1
routes the RSTP protocol for the switches. It does not actually process the RSTP proto-
col. Further information can be found in Application Guide for BACnet Networks in Build-
ing Automation (A6V11159798).
● USB connection for service and commissioning and firmware download