Data Sheet for Application

Application Sheet VAV012
Supply VAV with integrated damper actuator
DXR1.E02PLZ-112
3 / 4
Technical information in this document are subject to change. Drawings serve illustration purposes only.
Siemens is not responsible for content and any manual modifications.
2021-02-19
A6V11918866_en--_b
Application
configuration
Equipment Channel/Signal Settings example
On-board output Supply air VAV position (integrated
actuator)
Y1, Y2; 3-position Y1, Y2; 3-position
On-board input Supply air VAV differential air
pressure (integrated sensor)
P1 P1
HVAC Supply air VAV Supply air VAV 12, press, duct area, ctr.
Supply air VAV 13, press, flow conv, ctr.
Supply air VAV 15, press, dependent ctrl.
Supply air VAV 13, press,
flow conv, ctr.
Optional
configuration
Equipment Channel/Signal Settings example
On-board output Extract air VAV (integrated actuator) Y1, Y2; 3-position
On-board input Extract air VAV position (integrated
sensor)
P1
HVAC Extract air VAV Extract air VAV 12, press, duct area,ctr.
Extract air VAV 13, press, flow conv,ctr.
Extract air VAV 15, press.dependent ctrl
Default values
Parameter Range Default value
Supply air VAV Supply air VAV box coefficient 0 … 10’000 m
3
/h/SqrtPa 150 m
3
/h/SqrtPa
Engineering  ABT Site engineering tool is required to configure the DXR1 automation stations.
 See the Siemens Download Center at www.siemens.com/bt/download for the latest application configuration and
workflow tutorials.

Management
station
Sample presentation of a VAV application on the Desigo CC management station.