User Manual

Step 5 - Command Parameters and Balance Individual Automation Stations
14 | 22
A6V11672234_en--_a
Step 5 - Command Parameters and Balance
Individual Automation Stations
Set up ABT Go app
a.
The first time the ABT Go app starts the Account view automatically. Else:
Go to
Account.
>
Account
b.
Enter Name
Enter
Mobile phone (i.e. [phone]).
Enter
Email address. (i.e. [e-mail])
Enter
Company.
This information will be added in exported data (i.e. reports).
c.
Go to Settings.
>
Settings
d.
Set ABT Go app Language.
Set
System of units (not used for DXR1.X).
e.
Set or change connection method.
Go to Connection.
> Connection
f.
Tap Device AP or Network or MS/TP or USB. The illustration changes
accordingly.
g.
Tap . Follow the appendant task and Tap as needed.
Opens the Network view.
The connection method is set.
The ABT Go app settings are set. Next time the ABT Go app opens the Devices
view directly.
Discover device on ABT Go
a.
Go to Devices.
>
Devices
Searching the network starts automatically.
b.
Tap to start / stop discovering devices.
c.
Identify the device in the list.
d.
1. Tap on device in the list.
2. Device view opens.
Command parameters and balance individual automation stations