User Manual

Step 4 - Global Commanding
A6V11672234_en--_a
13 | 22
4.3
Click the Discovered devices tab.
4.4
Select the automation station(s) to be commanded.
4.5
Click Preview. (Columns can be re-ordered to customize the display. Click a
column header and drag it to the desired location.)
The selected parameter displays below the selected automation station(s) in
the Discovered automation stations list.
4.6
View the current values of the previewed parameters.
4.7
Determine if additional commanding is needed. Enter or select values to be
commanded in the value field
(7)
for each parameter.
4.8
Click Commit to issue the command or Cancel to clear the preview.