User Guide

Operating TRA Room Automation Station
6
Checking TX-I/O Status as of V6
59
Siemens Desigo TRA User Guide
A6V10415564_en_a_21
Building Technologies 2015-06-23
6.2.1 Opening the Room Automation Station
 The user name and password for logging onto the management system is
defined in the
Setup and Service Assistant. The user name and password must
be entered each time if the user name is not defined.
1. In System Browser, select Logical View.
2. Select Logical > [Hierarchies] > [Room name].
3. Select Related items tab and then Devices.
4. Click Display TRA Hardware Configuration.
 Start page opens in the Setup and Service Assistant.
Setup and Service Assistent: Room automation station