User Guide

Operating TRA Room Automation Station

Test TX-I/O Status V5.1

Siemens Desigo TRA User Guide

A6V10415564_en_a_21

Building Technologies 2015-06-23

6 Operating TRA Room Automation Station

Desigo CC does not fully support all features and functions on the TRA room

automation station. Full support can, however, be achieved by operating the SSA

Wizard [➙ 57] or ABT-SSA Wizard [➙ 57] for the TRA room automation station.

and password in Desigo CC.

6.1 Test TX-I/O Status V5.1

The Setup and Service Assistant permits access to all devices on a TRA room

automation station.

Desigo TRA: Setup and Service Assistant

1. In System Browser, select Logical View.

2. Select Logical > [Hierarchy name] > [Room name].

3. Select theRelated items tab and then Device.

4. Click Display TRA Hardware Configuration.

 The dialog box to log on to the Setup and Service Assistant opens in the

Secondary pane..

5. Enter Name and Password and click Log on.

Note: The password is continuously defined in the BACnet tab >, Backup &

Restore expander, in the Reinitialize Password field.

6. Proceed as recommended in document

Desigo TRA - Setup & Service

Assistant

(CM111050).