User Guide

Operating Central Function
5
Standard Operation
53
Siemens Desigo TRA User Guide
A6V10415564_en_a_21
Building Technologies 2015-06-23
5.1.6 Raising Blinds
The fire department can manually raise blinds during an emergency.
1. In the System Browser, select Application View.
2. Select Applications > Logics > Central Functions > [Hierarchy Name] > Blinds
[Category] > [Emergency blinds control (CenEmgShd)].
3. In the Contextual pane, click the Operation tab.
 Displays emergency blinds control properties.
4. Select Command Value.
5. Click Manual.
6. In the Value drop-down list, select option Open.
7. Click Send.
 The message Command successful is displayed.
5.2 Standard Operation
The central function overrides local room operation. The required Operating mode
in the room can be commanded again after successful central override.
5.2.1 Switching on Lighting
 The System Manager is in Operating mode.
 The online connection is available.
1. In the System Browser, select Application View.
2. Select Applications > Logics > Central Functions > [Hierarchy Name] > Light
[Category] > [Central Lighting (CenOpLgt)].
 The associated lighting objects are displayed in the Central Function
Viewer.
3. Select the Operation tab.
4. Proceed as follows:
– For priority 13, select the Command user (13) property and click Manual.
– For priority 8, select the Command manual (8) property and click Manual.
5. In the Value drop-down list, select option Illuminance.