User Guide

4
Emergency Lighting Control
Operating and Testing Emergency Lighting
44
Siemens Desigo TRA User Guide A6V10415564_en_a_21
Building Technologies 2015-06-23
Defining Report Content
4.4.3.3 Defining Report Output
 The Emergency Light reports are opened.
1. Select the Settings tab.
2. For Report output click the symbol on the bottom right .
 The Report Output Definition opens.
3. Select Report Format (for example, PDF) and define the Destination type (for
example, file).
4. Click Configure Folders.
 The Report Output Folders Configuration dialog box opens.
5. Enter the Path and Alias Name of the target folder.
6. Click Add.
7. Click Close.
8. In the Report Output Definition, click Add.
 The defined output is displayed in the List of Folders for Report Output.
9. Click Close.
10. Click OK.
11. Click Save .
 The report is configured and is saved as a PDF file when running a reaction.