User Guide

3
Room operation as of V6
Selecting Room
32
Siemens Desigo TRA User Guide A6V10415564_en_a_21
Building Technologies 2015-06-23
 The Advanced Operation tab displays the properties.
2. Select the Priority Matrix Room Operating Mode property and click Manual.
 Displays the entry fields for Priority and Value.
3. In the Priority drop-down list, select option 08: Man.mode 2.
NOTE: In principle, any priority between 1-15 can be selected. Other BACnet
operator units also use priority 8 though. So that any BACnet operator unit can
reset the override to priority 8.
4. In the Value drop-down list, select the Operating mode:
– Comfort
– Economy
– Pre-Comfort
– Protection
5. Click Send.
 The message Manual successful is displayed.
NOTE:
Successful operation only possible if you can write at a higher priority than is
displayed on the status bar for the
Priority Matrix
. You can, for example, overwrite
at the present priority 13 at 8, but not 7.
The display arrow indicates an active priority of 1 to 8. At priority 8, you can
change the Operating mode, for example,
Protection
to
Pre-Comfort
.