User Guide

3
Room operation as of V6
Selecting Room
26
Siemens Desigo TRA User Guide A6V10415564_en_a_21
Building Technologies 2015-06-23
3.5.1.1 Displaying Present Room Operating Mode
The present room Operating mode is controlled based on various factors. The
information displayed indicates the current Operating mode in the room.
 The room is selected and room graphic is displayed.
1. Click Next .
 Plant Operating modeand Temperature setpoint determination are
displayed.
 The table displays the present object states (from left to right).
 The lines in green display the present Operating mode for the room.
2. Previous switches you back to the room graphic.
3.5.2 Temporarily Apply Operating Mode Comfort
Use this function to control a room to Comfort outside the defined occupancy
times. The room is controlled to
Comfort for two hours if the function is activated.
 The room is selected and room graphic is displayed.
1. In the room graphic, select Room > Room Operating mode.
 A red frame is displayed when selected.