User Guide

Room operation as of V6
3
Selecting Room
25
Siemens Desigo TRA User Guide
A6V10415564_en_a_21
Building Technologies 2015-06-23
3.5.1 Changing Operating Mode
 The room is selected and room graphic is displayed.
1. In the Contextual pane, click the Operation tab.
2. Select the Room Operating Mode property and click Manual.
3. In the Value drop-down list, select the Operating mode:
– Comfort
– Economy
– Pre-Comfort
– Protection
 The change to room Operating mode occurs at priority 13 and can be
overwritten locally.
4. Click Send.
 The message Manual successful is displayed.
5. You can also execute the following room conditions:
– Temporarily switching on Comfort
– Applying Scene
– Change Operating mode using advanced operation
– Change setpoint
– Switching on and off Lighting
– Enabling manual lighting
– Positioning blinds
NOTE:
Priority 13 is enabled if you click the
Auto
button and is set to
NULL
. What
happens:
‒ No change is made to room state if priority 1‒12 is pending.
‒ The room state is executed as per pending priority if priority 14‒16 is pending.