User Guide

Room operation up to V5.1
2
Enabling Manual Operation
17
Siemens Desigo TRA User Guide
A6V10415564_en_a_21
Building Technologies 2015-06-23
2.5 Enabling Manual Operation
 The room is selected and room graphic is displayed.
1. Select one or more settings to enable manual operation:
– Values > Operating Mode Room
– Settings > Setpoint Cooling Comfort
– Settings > Setpoint Heating Comfort
– Settings > Setpoint Shift
 A red frame is displayed when selected and the most important room
values are listed in the Contextual pane of the
Operation tab.
2. Select the Operation tab.
3. Select the Value property and then Auto.
 In the Extended Operation tab, the Priority Matrix changes to 13.
4. Click Send.
 The message Auto successful is displayed.
 The room operates in automatic mode if no other manual operating modes are
active.
2.6 Enabling Manual Operating at a Higher Priority
A trained user can overwrite the present operation at priority 13 using a higher
priority 8.
 The room is selected and room graphic is displayed.
1. Select one or more settings to enable manual operation:
– Values > Operating Mode Room
– Settings > Setpoint Cooling Comfort
– Settings > Setpoint Heating Comfort
– Settings > Setpoint Shift
 A red frame is displayed when selected and the most important room
values are listed in the Contextual pane of the
Operation tab.
2. Click the Advanced Operation tab.
3. Select the Priority Matrix property and then Command.
4. In the Priority drop-down list, select the desired priority.
– In the Value drop-down list, select the desired option.
5. Click Send.
 The message Command successful is displayed.