User Guide

2
Room operation up to V5.1
Switching On and Off Lighting
16
Siemens Desigo TRA User Guide A6V10415564_en_a_21
Building Technologies 2015-06-23
4. In the Value drop-down list, enter a new value.
5. Click Send.
 The message Command successful is displayed.
 Under Advanced Operation change the Priority Matrix to 13.
NOTE:
Successful operation only possible if you can write at a higher priority [➙ 77] than
is displayed on the status bar for the
Priority Matrix
. You can, for example,
overwrite present priority 13 with priority 8.
2.4 Switching On and Off Lighting
 The room is selected and room graphic is displayed.
1. Select the object lighting and object value .
 A red frame is displayed when selected and the most important values for
the lighting object are listed in the contextual pane of the
Operation tab.
2. Select the Operation tab.
 The lighting properties display.
3. Select the Value property and click Manual.
4. In the Value field, define the desired value or use the sliding controller.
5. Click Send.
 The message Command successful is displayed.
 The lighting objects are displayed in yellow.
 In the Advanced Operation tab the Priority Matrix changes to 13.
NOTE:
Successful operation only possible if you can write at a higher priority [➙ 84] than
is displayed on the status bar for the
Priority Matrix
. You can, for example,
overwrite present priority 13 with priority 8.