User Guide

2
Room operation up to V5.1
Selecting Room
14
Siemens Desigo TRA User Guide A6V10415564_en_a_21
Building Technologies 2015-06-23
2.1 Selecting Room
Views of the Rooms
View in System Browser
Floor plan view
 System Manager is in Operating mode.
1. In the System Browser or Floor plan view, select the room to operate.
 The room graphic opens and displays the most important values in the
Operation tab.
NOTE: Do not make changes in the dialog boxes.
2. You can now do the following:
– Change Operating Mode [➙ 14]
– Change setpoint [➙ 15]
– Switching On and Off Lighting [➙ 16]
– Positioning Blinds [➙ 17]
2.2 Changing the Operating Mode
 The room is selected and room graphic is displayed.
 You can write a command at the present priority [➙ 77] (see NOTE).
1. Select Values > Operating Mode Room.
 A red frame is displayed when selected and the most important values for
the Operating mode are listed in the contextual pane of the
Operation tab.
2. Select the Operation tab.